Brett Schumann, welcome to brettworld

Custom kite surfboard - The Rocker Table

02 June 2008

I built the rocker table a year ago using two sheets of white combi board (1600mm X 600mm) and 2 lengths of 2x4 (1600mm) and a packet of wood screws. The combi boards I left their orginal length and cut the 2x4 50mm shorter than the table. The one sheet of the combi board is to be used as the table base while the other sheet is to be used for the actual rocker. See the pics below. A rocker table is used to introduce a curve to the board.

top of rocker table edge of rocker table bottom of rocker table
Share this
share on twitter save on delicious share on facebook share on digg share on stumble upon